Night, white
Compact scarecrow
A toy scarecrow in a patched brown coat with a carved pumpkin head, up to four laptops inside; at night it grins at the front and shows a moon and stars at the back. 90 cm tall.
Designed and checked in CAD. Not built in real life yet.
€24
Standard plan. Every computer count included.
Inside
Take it apart
Size
How many computers?
- Height
- 0.90 m
- Footprint
- 50 × 50 cm
- Computers
- 4 laptops
- Power
- 1 power supply, 120 of 260 W
- Filament
- 12.3 kg
- Print time
- 666 h
- OrcaSlicer estimate, ±15 %
- Weight with boards
- 16.3 kg
- Parts and filament, without boards
- €448
- With used laptops (€40–60 each)
- €608–688
About this model
A chunky toy scarecrow of no particular story or character: a square brown coat with three big orange buttons down the front, stitched orange patches on every side and orange straw sticking out at the collar and at the hem. On top sits a pumpkin head with brown rib lines, a brown stem, a curly tendril and a leaf on its roof. The pumpkin is carved right through: two triangle eyes, a triangle nose and a jagged grin at the front, a crescent moon and five stars at the back. Inside the head an orange wall is lit from behind, so at night the face grins at you like a candle in a pumpkin and the back shows a little night sky. It has no arms and no hat, so it reads as a pumpkin on a patched coat; think autumn, not any particular holiday. Up to four laptop blades stand in a row in the coat. Its walls are solid, so from outside you never see a computer board; the buttons, patches and straw are glued on. Air comes in through the slatted vents in the plinth and leaves through the carvings. You pick 2, 3 or 4 computers and the model stays the same size: 0.50 x 0.50 m, 90 cm tall to the top of the stem.
Worth knowing
About 10.5 kg of filament with two computers and 12.3 kg with four (roughly 355 to 415 hours on a fast printer), in two colours: brown for the coat, the rib lines, the stem, the tendril and the leaf, and orange for the pumpkin head, its roof plate and inner wall, the buttons, the patches and the straw. The head is printed in nine cells with a 1.2 mm roof skin and glued together, so handle it with care; the thin straw tips are glued flat and stay fragile until then. The stem, tendril and leaf are decoration, never lift the scarecrow by them. They are glued on, so a hard knock can snap them off. It needs two 1 m LED strips, one for each half of the inner wall. The head (plate, cells, inner wall, ribs, stem, tendril and leaf glued into one) is not glued down because it is the way in; lift it straight up with both hands under the edge of its roof, never by the stem.
Shopping list
What to buy for it
| Item | Qty | Price each | Where |
|---|---|---|---|
| Shared supply MEAN WELL GST280A20-C6P | 1 | €93.80 | Shop |
| Mains cord C13, 2 m, one per supply (not in the supply's box) | 1 | €3.60 | Shop |
| Supply output lead Molex 215328-1061 | 1 | €5.20 | Shop |
| XT60 pigtails, 5 + 5 pack (one pair per blade) | 1 | €11.09 | Shop Ad, affiliate link |
| Wago 221-412 (2-way), single pieces: 4 per blade (red+fuse, fuse+white, black+black, blue alone) | 16 | €0.55 | Shop |
| Wago 221-415 (5-way), single pieces: 4 for the bus + 2 per extra supply | 4 | €0.80 | Shop |
| ELNONE board plug, 2 pack (one per blade) | 2 | €8.56 | Shop Ad, affiliate link |
| JZK 5015 USB fans, 4 pack (blade heads + 4 base intake fans) | 2 | €13.61 | Shop Ad, affiliate link |
| Fuse holders, 5 pack (blades) | 1 | €6.82 | Shop Ad, affiliate link |
| 5 A fuses, 10 pack | 1 | €6.75 | Shop Ad, affiliate link |
| Keystone couplers, 10 pack | 1 | €14.36 | Shop Ad, affiliate link |
| Patch 0.25 m, 10 pack | 1 | €12.85 | Shop Ad, affiliate link |
| Patch 2 m, 5 pack | 1 | €11.09 | Shop Ad, affiliate link |
| Switch Cudy GS105U 5-port | 1 | €13.01 | Shop Ad, affiliate link |
| USB charger 50 W, 5 ports | 2 | €9.52 | Shop Ad, affiliate link |
| OULARA COB USB strip 2 m (model glow) | 1 | €21.17 | Shop Ad, affiliate link |
| OULARA COB USB strip 1 m (on the inside of the orange liner in the pumpkin head, one per half, the liner glows behind the carved face and the moon) | 2 | €14.11 | Shop Ad, affiliate link |
| M3 screws, 300 pcs | 1 | €14.05 | Shop Ad, affiliate link |
| Translucent PETG 1 kg (eSUN transparent orange) | 1 | €12.37 | Shop Ad, affiliate link |
| Opaque PETG 1 kg spool (eSUN black, budget; sold as a 4 kg bundle) | 13 | €9.07 | Shop Ad, affiliate link |
| Total, without boards | €448 | ||
Prices with VAT as shown in October 2026. Shipping, glue and the boards are not included. Also not counted, if you do not own them: a multimeter (about €8.56) and a power strip (about €15.12).
Budget black PETG.
Drives: every board keeps the drive its laptop came with (system only), so there is nothing to buy. A board bought without one needs a 256 GB M.2 2280 drive (approx. €56). Optional, not in the total: one shared disk of 1 TB or more for the render manager's shared folder, on one laptop board, in its own M.2 slot, or in a USB case (approx. €19) on the base floor. Reuse an old one, or buy a 1 TB M.2 2280 drive for approx. €136–146. Drive prices are approximate (October 2026): check before buying.
No printer yet?
To print it at this size: 12.3 kg of PETG. Add 10% for waste and test pieces and that is 14 spools of 1 kg, approx. €196–266 with the PETG below (the shopping list above already includes filament). Print time, estimated: about 666 h with the standard 0.4 mm nozzle (Ender-3 V3 SE class), 413 h with a 0.6 mm nozzle.
Print times are slicer estimates (OrcaSlicer) and may vary by ±15 %.
Advertising: the links in this list are affiliate links. If you buy through them I earn a small commission. The price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
Printers that take every part (bed 220 × 220 mm or more): Creality Ender-3 V3 SE (€169) · Bambu Lab A1 (€259) · Bambu Lab P1S (€379)
PETG: Elegoo PETG Pro, 1 kg (€13.99/kg) · Bambu PETG Basic, 1 kg with spool (€18.99/kg)
Prices as shown on each shop's own page in October 2026. Shipping and the final VAT are added at checkout.