
Night, white
Compact camper van
A teal and cream toy camper van with a pop-up tent on its roof, up to four laptops inside, the tent glows at night. 77 cm tall.
Designed and checked in CAD. Not built in real life yet.
€24
Standard plan. Every computer count included.
Inside
Take it apart
Size
How many computers?
- Height
- 0.77 m
- Footprint
- 51 × 52 cm
- Computers
- 4 laptops
- Power
- 1 power supply, 120 of 260 W
- Filament
- 12.2 kg
- Print time
- 660 h
- OrcaSlicer estimate, ±15 %
- Weight with boards
- 16.2 kg
- Parts and filament, without boards
- €439
- With used laptops (€40–60 each)
- €599–679
About this model
A chunky toy camper van of no particular make: a teal lower body and a cream upper body, four wheels on the sides, a split windscreen, two round headlamps and a bumper at the front, two windows on each side, and at the back a rear window, two tail lamps, a bumper and a ladder up to the roof. On the roof sits a pop-up tent: teal canvas walls under a roof shell that overhangs them, with two openings on every side and the flaps rolled up above them. Inside the tent a cream wall is lit from behind, so at night the van stays dark and only the tent glows, with a lantern hanging in the front opening whose panes light up. It is static, the wheels do not turn, and the tent reads more like a box with arched openings than like fabric. Up to four laptop blades stand in a row in the van's body. Its walls are solid, so from outside you never see a computer board; the wheels, windows and lamps are glued on. Air comes in through the slatted vents in the plinth (the wheels stand a little off them) and leaves through the tent's openings. You pick 2, 3 or 4 computers and the model stays the same size: 0.51 x 0.52 m, 77 cm tall.
Worth knowing
About 10.5 kg of filament with two computers and 12.2 kg with four (roughly 350 to 410 hours on a fast printer), in two colours: teal for the lower body, the tent, the windows and the lantern, and cream for the upper body, the roof plate, the tent's inner wall, the wheels, lamps, bumpers and ladder. The tent is printed in nine cells with a thin 1.2 mm skin and glued together, and the lantern hangs on a thin cord, so handle it with care. Only the tent glows at night, the rest of the van stays dark, and the tent reads more like a box with arched openings than like fabric. It needs two 1 m LED strips, one for each half of the liner. The van is static: the wheels do not turn. The wheels, the ladder and the bumpers are decoration, never lift or push the van by them. The tent (plate, tent, inner wall and lantern glued into one) is not glued down because it is the way in; lift it straight up with both hands under the edge of its roof shell.
Shopping list
What to buy for it
| Item | Qty | Price each | Where |
|---|---|---|---|
| Shared supply MEAN WELL GST280A20-C6P | 1 | €93.80 | Shop |
| Mains cord C13, 2 m, one per supply (not in the supply's box) | 1 | €3.60 | Shop |
| Supply output lead Molex 215328-1061 | 1 | €5.20 | Shop |
| XT60 pigtails, 5 + 5 pack (one pair per blade) | 1 | €11.09 | Shop Ad, affiliate link |
| Wago 221-412 (2-way), single pieces: 4 per blade (red+fuse, fuse+white, black+black, blue alone) | 16 | €0.55 | Shop |
| Wago 221-415 (5-way), single pieces: 4 for the bus + 2 per extra supply | 4 | €0.80 | Shop |
| ELNONE board plug, 2 pack (one per blade) | 2 | €8.56 | Shop Ad, affiliate link |
| JZK 5015 USB fans, 4 pack (blade heads + 4 base intake fans) | 2 | €13.61 | Shop Ad, affiliate link |
| Fuse holders, 5 pack (blades) | 1 | €6.82 | Shop Ad, affiliate link |
| 5 A fuses, 10 pack | 1 | €6.75 | Shop Ad, affiliate link |
| Keystone couplers, 10 pack | 1 | €14.36 | Shop Ad, affiliate link |
| Patch 0.25 m, 10 pack | 1 | €12.85 | Shop Ad, affiliate link |
| Patch 2 m, 5 pack | 1 | €11.09 | Shop Ad, affiliate link |
| Switch Cudy GS105U 5-port | 1 | €13.01 | Shop Ad, affiliate link |
| USB charger 50 W, 5 ports | 2 | €9.52 | Shop Ad, affiliate link |
| OULARA COB USB strip 2 m (model glow) | 1 | €21.17 | Shop Ad, affiliate link |
| OULARA COB USB strip 1 m (on the inside of the cream liner in the roof tent, one per half, the liner glows behind the tent's openings) | 2 | €14.11 | Shop Ad, affiliate link |
| M3 screws, 300 pcs | 1 | €14.05 | Shop Ad, affiliate link |
| Translucent PETG 1 kg (eSUN transparent orange) | 1 | €12.37 | Shop Ad, affiliate link |
| Opaque PETG 1 kg spool (eSUN black, budget; sold as a 4 kg bundle) | 12 | €9.07 | Shop Ad, affiliate link |
| Total, without boards | €439 | ||
Prices with VAT as shown in October 2026. Shipping, glue and the boards are not included. Also not counted, if you do not own them: a multimeter (about €8.56) and a power strip (about €15.12).
Budget black PETG.
Drives: every board keeps the drive its laptop came with (system only), so there is nothing to buy. A board bought without one needs a 256 GB M.2 2280 drive (approx. €56). Optional, not in the total: one shared disk of 1 TB or more for the render manager's shared folder, on one laptop board, in its own M.2 slot, or in a USB case (approx. €19) on the base floor. Reuse an old one, or buy a 1 TB M.2 2280 drive for approx. €136–146. Drive prices are approximate (October 2026): check before buying.
No printer yet?
To print it at this size: 12.2 kg of PETG. Add 10% for waste and test pieces and that is 14 spools of 1 kg, approx. €196–266 with the PETG below (the shopping list above already includes filament). Print time, estimated: about 660 h with the standard 0.4 mm nozzle (Ender-3 V3 SE class), 410 h with a 0.6 mm nozzle.
Print times are slicer estimates (OrcaSlicer) and may vary by ±15 %.
Advertising: the links in this list are affiliate links. If you buy through them I earn a small commission. The price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
Printers that take every part (bed 220 × 220 mm or more): Creality Ender-3 V3 SE (€169) · Bambu Lab A1 (€259) · Bambu Lab P1S (€379)
PETG: Elegoo PETG Pro, 1 kg (€13.99/kg) · Bambu PETG Basic, 1 kg with spool (€18.99/kg)
Prices as shown on each shop's own page in October 2026. Shipping and the final VAT are added at checkout.