Night, white
Compact sleepy bunny
A grey toy bunny with two tall ears, up to four laptops inside; at night its sleeping face glows at the front and three carrots glow at the back. 100 cm tall.
Designed and checked in CAD. Not built in real life yet.
€24
Standard plan. Every computer count included.
Inside
Take it apart
Size
How many computers?
- Height
- 0.99 m
- Footprint
- 55 × 50 cm
- Computers
- 4 laptops
- Power
- 1 power supply, 120 of 260 W
- Filament
- 12.3 kg
- Print time
- 668 h
- OrcaSlicer estimate, ±15 %
- Weight with boards
- 16.3 kg
- Parts and filament, without boards
- €448
- With used laptops (€40–60 each)
- €608–688
About this model
A chunky toy bunny of no particular story or character: a square grey body with two big white feet at the bottom (each with a paw print), a white tummy, two white front paws held together under the chin and a fluffy white tail at the back. On top sits its head with two tall grey ears standing up, white inner ears, white whiskers and two white buck teeth. The head is carved right through: two closed eyes, a little triangle nose and a mouth at the front, three carrots with leaves at the back. Inside the head a white wall is lit from behind, so at night the bunny sleeps with a glowing face, and from behind you see the carrots it dreams of. Up to four laptop blades stand in a row in the body. Its walls are solid, so from outside you never see a computer board; feet, tummy, paws and tail are glued on. Air comes in through the slatted vents in the plinth and leaves through the carvings. You pick 2, 3 or 4 computers and the model stays the same size: 0.55 x 0.50 m, 100 cm tall to the tips of the ears. The tail sticks out at the back, which is why the footprint is 0.55 x 0.50 m and not square. It is not tied to any season or holiday.
Worth knowing
About 10.5 kg of filament with two computers and 12.3 kg with four (roughly 355 to 415 hours on a fast printer), in two colours: grey for the body, the head, its roof plate and the ears, and white for the feet, the tummy, the paws, the tail, the inner ears, the whiskers, the teeth and the inner wall of the head. The head is printed in nine cells with a 1.2 mm roof skin and glued together, so handle it with care. The ears are hollow and glued onto the roof by their foot; they are decoration, never lift the bunny by them. The ears and the tail are glued on, so a hard knock can snap them off. It needs two 1 m LED strips, one for each half of the inner wall. The head (plate, cells, inner wall, ears, inner ears, whiskers and teeth glued into one) is not glued down because it is the way in; lift it straight up with both hands under the edge of its roof, never by the ears.
Shopping list
What to buy for it
| Item | Qty | Price each | Where |
|---|---|---|---|
| Shared supply MEAN WELL GST280A20-C6P | 1 | €93.80 | Shop |
| Mains cord C13, 2 m, one per supply (not in the supply's box) | 1 | €3.60 | Shop |
| Supply output lead Molex 215328-1061 | 1 | €5.20 | Shop |
| XT60 pigtails, 5 + 5 pack (one pair per blade) | 1 | €11.09 | Shop Ad, affiliate link |
| Wago 221-412 (2-way), single pieces: 4 per blade (red+fuse, fuse+white, black+black, blue alone) | 16 | €0.55 | Shop |
| Wago 221-415 (5-way), single pieces: 4 for the bus + 2 per extra supply | 4 | €0.80 | Shop |
| ELNONE board plug, 2 pack (one per blade) | 2 | €8.56 | Shop Ad, affiliate link |
| JZK 5015 USB fans, 4 pack (blade heads + 4 base intake fans) | 2 | €13.61 | Shop Ad, affiliate link |
| Fuse holders, 5 pack (blades) | 1 | €6.82 | Shop Ad, affiliate link |
| 5 A fuses, 10 pack | 1 | €6.75 | Shop Ad, affiliate link |
| Keystone couplers, 10 pack | 1 | €14.36 | Shop Ad, affiliate link |
| Patch 0.25 m, 10 pack | 1 | €12.85 | Shop Ad, affiliate link |
| Patch 2 m, 5 pack | 1 | €11.09 | Shop Ad, affiliate link |
| Switch Cudy GS105U 5-port | 1 | €13.01 | Shop Ad, affiliate link |
| USB charger 50 W, 5 ports | 2 | €9.52 | Shop Ad, affiliate link |
| OULARA COB USB strip 2 m (model glow) | 1 | €21.17 | Shop Ad, affiliate link |
| OULARA COB USB strip 1 m (on the inside of the white liner in the bunny's head, one per half, the liner glows behind the sleeping face and the carrots) | 2 | €14.11 | Shop Ad, affiliate link |
| M3 screws, 300 pcs | 1 | €14.05 | Shop Ad, affiliate link |
| Translucent PETG 1 kg (eSUN transparent orange) | 1 | €12.37 | Shop Ad, affiliate link |
| Opaque PETG 1 kg spool (eSUN black, budget; sold as a 4 kg bundle) | 13 | €9.07 | Shop Ad, affiliate link |
| Total, without boards | €448 | ||
Prices with VAT as shown in October 2026. Shipping, glue and the boards are not included. Also not counted, if you do not own them: a multimeter (about €8.56) and a power strip (about €15.12).
Budget black PETG.
Drives: every board keeps the drive its laptop came with (system only), so there is nothing to buy. A board bought without one needs a 256 GB M.2 2280 drive (approx. €56). Optional, not in the total: one shared disk of 1 TB or more for the render manager's shared folder, on one laptop board, in its own M.2 slot, or in a USB case (approx. €19) on the base floor. Reuse an old one, or buy a 1 TB M.2 2280 drive for approx. €136–146. Drive prices are approximate (October 2026): check before buying.
No printer yet?
To print it at this size: 12.3 kg of PETG. Add 10% for waste and test pieces and that is 14 spools of 1 kg, approx. €196–266 with the PETG below (the shopping list above already includes filament). Print time, estimated: about 668 h with the standard 0.4 mm nozzle (Ender-3 V3 SE class), 414 h with a 0.6 mm nozzle.
Print times are slicer estimates (OrcaSlicer) and may vary by ±15 %.
Advertising: the links in this list are affiliate links. If you buy through them I earn a small commission. The price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
Printers that take every part (bed 220 × 220 mm or more): Creality Ender-3 V3 SE (€169) · Bambu Lab A1 (€259) · Bambu Lab P1S (€379)
PETG: Elegoo PETG Pro, 1 kg (€13.99/kg) · Bambu PETG Basic, 1 kg with spool (€18.99/kg)
Prices as shown on each shop's own page in October 2026. Shipping and the final VAT are added at checkout.