Night, white
Compact toy bunny (3D)
A chunky toy bunny with up to four laptops inside its round body: a brown sitting bunny with big haunches, two tall ears, a cream belly, muzzle, paws and pom-pom tail, and at night its two big eyes, the insides of its ears and a row of spots on its neck glow. 99.8 cm tall.
Designed and checked in CAD. Not built in real life yet.
€24
Standard plan. Every computer count included.
Inside
Take it apart
Size
How many computers?
- Height
- 1.00 m
- Footprint
- 82 × 89 cm
- Computers
- 4 laptops
- Power
- 1 power supply, 120 of 260 W
- Filament
- 12.1 kg
- Print time
- 623 h
- OrcaSlicer estimate, ±15 %
- Weight with boards
- 16.2 kg
- Parts and filament, without boards
- €439
- With used laptops (€40–60 each)
- €599–679
About this model
A generic chunky toy bunny, like a plush or wooden toy rabbit, not a copy of any real toy or character. The bunny itself is the model: a round, pear-shaped brown body, fullest low down, with a big rounded haunch on each side that runs forward into a hind foot on the floor, two cream front paws, a cream belly and a cream pom-pom tail at the back. The round head is the lid: two tall hollow ears stand on it, two big round brown eye sockets with dark pupils look out, and a cream muzzle with two cheeks carries a small brown nose. The computers sit inside the body, out of sight; the warm air leaves through the eyes.
Worth knowing
About 10.4 kg of filament with two computers and 12.1 kg with four (roughly 332 to 390 hours on a fast printer), in two colours: brown for the body, the haunches, the head, the ears, the eye sockets, the nose, the head flange, the spacers and the pupils, and cream for the case walls (hidden inside), the roof plate, the belly, the muzzle, the inner ears, the neck panels, the paws, the tail and the inner wall in the head. The body and the head are 0.8 mm skins in many pieces that overlap on short tongues; they carry nothing but themselves, so never lift the bunny by the body, the haunches, the ears or the eyes - take the lid off and lift the case by its top rim. How well the 0.8 mm panels keep their shape, and how brightly the inner ears glow, has only been worked out on paper, not seen on a real print. The lid (plate, head, eyes, muzzle, nose and ears glued into one) is not glued down because it is the way in; lift it straight up with both hands round the head, not by the ears. It is a static desk model.
Shopping list
What to buy for it
| Item | Qty | Price each | Where |
|---|---|---|---|
| Shared supply MEAN WELL GST280A20-C6P | 1 | €93.80 | Shop |
| Mains cord C13, 2 m, one per supply (not in the supply's box) | 1 | €3.60 | Shop |
| Supply output lead Molex 215328-1061 | 1 | €5.20 | Shop |
| XT60 pigtails, 5 + 5 pack (one pair per blade) | 1 | €11.09 | Shop Ad, affiliate link |
| Wago 221-412 (2-way), single pieces: 4 per blade (red+fuse, fuse+white, black+black, blue alone) | 16 | €0.55 | Shop |
| Wago 221-415 (5-way), single pieces: 4 for the bus + 2 per extra supply | 4 | €0.80 | Shop |
| ELNONE board plug, 2 pack (one per blade) | 2 | €8.56 | Shop Ad, affiliate link |
| JZK 5015 USB fans, 4 pack (blade heads + 4 base intake fans) | 2 | €13.61 | Shop Ad, affiliate link |
| Fuse holders, 5 pack (blades) | 1 | €6.82 | Shop Ad, affiliate link |
| 5 A fuses, 10 pack | 1 | €6.75 | Shop Ad, affiliate link |
| Keystone couplers, 10 pack | 1 | €14.36 | Shop Ad, affiliate link |
| Patch 0.25 m, 10 pack | 1 | €12.85 | Shop Ad, affiliate link |
| Patch 2 m, 5 pack | 1 | €11.09 | Shop Ad, affiliate link |
| Switch Cudy GS105U 5-port | 1 | €13.01 | Shop Ad, affiliate link |
| USB charger 50 W, 5 ports | 2 | €9.52 | Shop Ad, affiliate link |
| OULARA COB USB strip 2 m (model glow) | 1 | €21.17 | Shop Ad, affiliate link |
| OULARA COB USB strip 1 m (one on the inside of the cream liner in the bunny's head, it lights the inner ears and the nape spots; one wound round the two eye sockets, half each) | 2 | €14.11 | Shop Ad, affiliate link |
| M3 screws, 300 pcs | 1 | €14.05 | Shop Ad, affiliate link |
| Translucent PETG 1 kg (eSUN transparent orange) | 1 | €12.37 | Shop Ad, affiliate link |
| Opaque PETG 1 kg spool (eSUN black, budget; sold as a 4 kg bundle) | 12 | €9.07 | Shop Ad, affiliate link |
| Total, without boards | €439 | ||
Prices with VAT as shown in October 2026. Shipping, glue and the boards are not included. Also not counted, if you do not own them: a multimeter (about €8.56) and a power strip (about €15.12).
Budget black PETG.
Drives: every board keeps the drive its laptop came with (system only), so there is nothing to buy. A board bought without one needs a 256 GB M.2 2280 drive (approx. €56). Optional, not in the total: one shared disk of 1 TB or more for the render manager's shared folder, on one laptop board, in its own M.2 slot, or in a USB case (approx. €19) on the base floor. Reuse an old one, or buy a 1 TB M.2 2280 drive for approx. €136–146. Drive prices are approximate (October 2026): check before buying.
No printer yet?
To print it at this size: 12.1 kg of PETG. Add 10% for waste and test pieces and that is 14 spools of 1 kg, approx. €196–266 with the PETG below (the shopping list above already includes filament). Print time, estimated: about 623 h with the standard 0.4 mm nozzle (Ender-3 V3 SE class), 390 h with a 0.6 mm nozzle.
Print times are slicer estimates (OrcaSlicer) and may vary by ±15 %.
Advertising: the links in this list are affiliate links. If you buy through them I earn a small commission. The price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
Printers that take every part (bed 220 × 220 mm or more): Creality Ender-3 V3 SE (€169) · Bambu Lab A1 (€259) · Bambu Lab P1S (€379)
PETG: Elegoo PETG Pro, 1 kg (€13.99/kg) · Bambu PETG Basic, 1 kg with spool (€18.99/kg)
Prices as shown on each shop's own page in October 2026. Shipping and the final VAT are added at checkout.